ARIES 
CURT 
LUVERNE 
UWS 
TrailChaser Jeep Wrangler JL, Gladiator Aluminum Front Bumper (Option 3) #2082094
- TrailChaser Jeep Wrangler JL, Gladiator Aluminum Front Bumper (Option 3)
- Modular pieces can be added or removed as desired to change the look any time
- LEDs feature waterproof aluminum housing and 50,000-hour lifespan
- Flood beam pattern with 2,200-lumen output each
- Cutouts and mounting tabs allow for OE lights and additional aftermarket LEDs
- Center brush guard provides two light mounting tabs and extra winch protection
- Hardened T6 aluminum construction to be strong, lightweight and rust-free
- Textured black powder coat easily hides minor scratches and grime
- Pre-drilled holes for anti-rattle D-rings #2081300 and tow hooks #15600TW
- 22-1/2" x 7-3/4" winch housing (adapter #2072100 required for larger winches)
- Uses pre-existing factory mounting points for no-drill installation
- Front and rear bumpers available
- Limited lifetime warranty (five-year finish, one-year parts)
Notes:
- Includes center section #2081004, corners #2081205, brush guard #2081255 and mounting hardware
- Models with factory steel front bumper will require the purchase of aftermarket fog lights (not included)
Guides & Install Sheets
Product Videos
-
New ARIES Jeep Wrangler JL Accessories Featured at SEMA 2018 -
TrailChaser® Jeep Bumper for Wrangler JL & JK | Features & Benefits
PRODUCT SPECIFICATIONS
- FinishTEXTURED BLACK POWDER COAT
Hub Warehouse D25- MaterialAluminum
- Mount Type DescriptionNot Applicable
- Part TypeBumper Kit
- Shipping Weight58.250
- Side Application Type DescriptionNot Applicable
- WarrantyLimited Lifetime Warranty (Five-Year Finish, One-Year Parts)
The ARIES TrailChaser® Jeep bumper is unlike any other bumper for the Jeep Wrangler JL and Gladiator because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization.
This particular bumper includes the center section, round center brush guard and corner end caps with flush-mount LED lights. It features a standard winch housing and provides mounting points for additional lights, D-rings and tow hooks. It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in powder-coated steel.
All ARIES TrailChaser® bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required.
| YEAR | MAKE | MODEL | STYLE |
|---|---|---|---|
| 2021 | Jeep | Gladiator | All |
| 2018 | Jeep | Wrangler | JL |
| 2019 | Jeep | Wrangler | JL |
| 2020 | Jeep | Wrangler | JL |
| 2021 | Jeep | Wrangler | JL |
| 2020 | Jeep | Gladiator | All |
| 2022 | Jeep | Gladiator | All |
| 2022 | Jeep | Wrangler | JL |
| 2023 | Jeep | Gladiator | All |
| 2023 | Jeep | Wrangler | JL |
| 2024 | Jeep | Wrangler | JL |
-
The bumper looks good, but on the Mojave you will have to make cuts in your front skid plate to fits the bumper. The fit and finish was not the best; the seams on the end caps were uneven and visible. The ditch lights work but the light angle on a 4” lifted truck leaves something to be desired. Lastly, the aluminum bumper is not rated for a winch by itself and the winch plate requires that you remove the front skid plate on the Mojave at a minimum. The company spokesman I contacted stated that ..”they don’t test these bumpers on all models of Gladiators as there are to many…”
So 3 stars -
Looks good and the aluminum option with lights was nice; however on the 2022 Mojave the factory skid plate, had to be trimmed in two locations to fit the bumper. And, if you have the factory LED lights; the fog lamps will not mount.
Lastly, the steel winch reinforcement bracket does not fit the Mojave model.